Source data line java

Source data line java

A source data line is a data line to which data may be written. It acts as a source to its mixer. An application writes audio bytes to a source data line, which handles the buffering of the bytes and delivers them to the mixer. The mixer may mix the samples with those from other sources and then deliver the mix to a target such as an output port (which may represent an audio output device on a sound card). Note that the naming convention for this interface reflects the relationship between the line and its mixer. From the perspective of an application, a source data line may act as a target for audio data. A source data line can be obtained from a mixer by invoking the getLine method of Mixer with an appropriate DataLine.Info object. The SourceDataLine interface provides a method for writing audio data to the data line’s buffer. Applications that play or mix audio should write data to the source data line quickly enough to keep the buffer from underflowing (emptying), which could cause discontinuities in the audio that are perceived as clicks. Applications can use the available method defined in the DataLine interface to determine the amount of data currently queued in the data line’s buffer. The amount of data which can be written to the buffer without blocking is the difference between the buffer size and the amount of queued data. If the delivery of audio output stops due to underflow, a STOP event is generated. A START event is generated when the audio output resumes.

Nested Class Summary

Nested classes/interfaces declared in interface javax.sound.sampled.DataLine

Method Summary

Opens the line with the specified format, causing the line to acquire any required system resources and become operational.

Opens the line with the specified format and suggested buffer size, causing the line to acquire any required system resources and become operational.

Methods declared in interface javax.sound.sampled.DataLine

Methods declared in interface javax.sound.sampled.Line

Method Detail

open

void open​(AudioFormat format, int bufferSize) throws LineUnavailableException

Opens the line with the specified format and suggested buffer size, causing the line to acquire any required system resources and become operational. The buffer size is specified in bytes, but must represent an integral number of sample frames. Invoking this method with a requested buffer size that does not meet this requirement may result in an IllegalArgumentException . The actual buffer size for the open line may differ from the requested buffer size. The value actually set may be queried by subsequently calling DataLine.getBufferSize() . If this operation succeeds, the line is marked as open, and an OPEN event is dispatched to the line’s listeners. Invoking this method on a line which is already open is illegal and may result in an IllegalStateException . Note that some lines, once closed, cannot be reopened. Attempts to reopen such a line will always result in a LineUnavailableException .

open

void open​(AudioFormat format) throws LineUnavailableException

Opens the line with the specified format, causing the line to acquire any required system resources and become operational. The implementation chooses a buffer size, which is measured in bytes but which encompasses an integral number of sample frames. The buffer size that the system has chosen may be queried by subsequently calling DataLine.getBufferSize() . If this operation succeeds, the line is marked as open, and an OPEN event is dispatched to the line’s listeners. Invoking this method on a line which is already open is illegal and may result in an IllegalStateException . Note that some lines, once closed, cannot be reopened. Attempts to reopen such a line will always result in a LineUnavailableException .

write

int write​(byte[] b, int off, int len)

Writes audio data to the mixer via this source data line. The requested number of bytes of data are read from the specified array, starting at the given offset into the array, and written to the data line’s buffer. If the caller attempts to write more data than can currently be written (see available ), this method blocks until the requested amount of data has been written. This applies even if the requested amount of data to write is greater than the data line’s buffer size. However, if the data line is closed, stopped, or flushed before the requested amount has been written, the method no longer blocks, but returns the number of bytes written thus far. The number of bytes that can be written without blocking can be ascertained using the available method of the DataLine interface. (While it is guaranteed that this number of bytes can be written without blocking, there is no guarantee that attempts to write additional data will block.) The number of bytes to write must represent an integral number of sample frames, such that: [ bytes written ] % [frame size in bytes ] == 0 The return value will always meet this requirement. A request to write a number of bytes representing a non-integral number of sample frames cannot be fulfilled and may result in an IllegalArgumentException .

Report a bug or suggest an enhancement
For further API reference and developer documentation see the Java SE Documentation, which contains more detailed, developer-targeted descriptions with conceptual overviews, definitions of terms, workarounds, and working code examples.
Java is a trademark or registered trademark of Oracle and/or its affiliates in the US and other countries.
Copyright © 1993, 2023, Oracle and/or its affiliates, 500 Oracle Parkway, Redwood Shores, CA 94065 USA.
All rights reserved. Use is subject to license terms and the documentation redistribution policy.

Источник

Source data line java

A source data line is a data line to which data may be written. It acts as a source to its mixer. An application writes audio bytes to a source data line, which handles the buffering of the bytes and delivers them to the mixer. The mixer may mix the samples with those from other sources and then deliver the mix to a target such as an output port (which may represent an audio output device on a sound card). Note that the naming convention for this interface reflects the relationship between the line and its mixer. From the perspective of an application, a source data line may act as a target for audio data. A source data line can be obtained from a mixer by invoking the getLine method of Mixer with an appropriate DataLine.Info object. The SourceDataLine interface provides a method for writing audio data to the data line’s buffer. Applications that play or mix audio should write data to the source data line quickly enough to keep the buffer from underflowing (emptying), which could cause discontinuities in the audio that are perceived as clicks. Applications can use the available method defined in the DataLine interface to determine the amount of data currently queued in the data line’s buffer. The amount of data which can be written to the buffer without blocking is the difference between the buffer size and the amount of queued data. If the delivery of audio output stops due to underflow, a STOP event is generated. A START event is generated when the audio output resumes.

Nested Class Summary

Nested classes/interfaces inherited from interface javax.sound.sampled.DataLine

Method Summary

Opens the line with the specified format, causing the line to acquire any required system resources and become operational.

Opens the line with the specified format and suggested buffer size, causing the line to acquire any required system resources and become operational.

Methods inherited from interface javax.sound.sampled.DataLine

Methods inherited from interface javax.sound.sampled.Line

Method Detail

open

void open(AudioFormat format, int bufferSize) throws LineUnavailableException

Opens the line with the specified format and suggested buffer size, causing the line to acquire any required system resources and become operational. The buffer size is specified in bytes, but must represent an integral number of sample frames. Invoking this method with a requested buffer size that does not meet this requirement may result in an IllegalArgumentException. The actual buffer size for the open line may differ from the requested buffer size. The value actually set may be queried by subsequently calling DataLine.getBufferSize() . If this operation succeeds, the line is marked as open, and an OPEN event is dispatched to the line’s listeners. Invoking this method on a line which is already open is illegal and may result in an IllegalStateException . Note that some lines, once closed, cannot be reopened. Attempts to reopen such a line will always result in a LineUnavailableException .

open

void open(AudioFormat format) throws LineUnavailableException

Opens the line with the specified format, causing the line to acquire any required system resources and become operational. The implementation chooses a buffer size, which is measured in bytes but which encompasses an integral number of sample frames. The buffer size that the system has chosen may be queried by subsequently calling DataLine.getBufferSize() . If this operation succeeds, the line is marked as open, and an OPEN event is dispatched to the line’s listeners. Invoking this method on a line which is already open is illegal and may result in an IllegalStateException . Note that some lines, once closed, cannot be reopened. Attempts to reopen such a line will always result in a LineUnavailableException .

write

int write(byte[] b, int off, int len)

Writes audio data to the mixer via this source data line. The requested number of bytes of data are read from the specified array, starting at the given offset into the array, and written to the data line’s buffer. If the caller attempts to write more data than can currently be written (see available ), this method blocks until the requested amount of data has been written. This applies even if the requested amount of data to write is greater than the data line’s buffer size. However, if the data line is closed, stopped, or flushed before the requested amount has been written, the method no longer blocks, but returns the number of bytes written thus far. The number of bytes that can be written without blocking can be ascertained using the available method of the DataLine interface. (While it is guaranteed that this number of bytes can be written without blocking, there is no guarantee that attempts to write additional data will block.) The number of bytes to write must represent an integral number of sample frames, such that:
[ bytes written ] % [frame size in bytes ] == 0
The return value will always meet this requirement. A request to write a number of bytes representing a non-integral number of sample frames cannot be fulfilled and may result in an IllegalArgumentException .

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2023, Oracle and/or its affiliates. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.

Источник