Radio buttons grouping in html

Html how to group radion button in html

In this article, we will introduce a method to add multiple groups of radio buttons in one form in HTML. Use the Different Value for the Attribute for Different Groups of Radio Button in HTML While working with radio buttons in HTML, sometimes you might need to use multiple groups of radio buttons in a single form.

Add Multiple Radio Button Groups in HTML

In this article, we will introduce a method to add multiple groups of radio buttons in one form in HTML.

Use the Different Value for the name Attribute for Different Groups of Radio Button in HTML

While working with radio buttons in HTML, sometimes you might need to use multiple groups of radio buttons in a single form. In such a case, selecting a group’s radio button may deselect the other group’s radio button.

To eliminate this problem, the value of the name attribute in the button element of the two groups must be different. It means that for the first group of radio buttons, we should use the same value for the name attribute in all of the radio buttons.

For the second group, the value of the name attribute should be different from the first group, but all the radio buttons in the second group should have the same value.

We can also use the fieldset element to separate the two groups visually. The tag groups the related elements in HTML.

In the example below, we will create two groups of radio buttons. In the first group, the user will be able to select a motorcycle, and in the second group, they will be able to select a car.

For example, create a form using the tag. Then, use the tag for the group of motorcycle radio buttons.

Create a radio button for Honda and set the value motorcycle for the name attribute. Next, create another radio button for Yamaha and again set the value of the name attribute to motorcycle .

After closing the tag, create another fieldset element for car radio buttons. In the car, create radio buttons for Hyundai and Toyota .

Set the name attribute’s value to car for both the buttons. The code example is shown below.

 
Select a Motorcyle Honda 
 Yamaha 
Select a Car Hyundai 
 Toyota 
 

fieldset element creates a border around each group.

This way, we can add two groups of radio buttons in a single form in HTML.

How to link fancy radio buttons to same ID?, «form-group col-md-12» · «form-group» · id · «Gender» name ; «funkyradio» · «funkyradio-primary col-md-6» · name · «radio» id ; «funkyradio» · «

How to add multiple radio buttons ( group ) in your HTML document

Radio buttons are used for selecting an option from multiple options. A radio group is created Duration: 5:12

Basic HTML and HTML5: Create a Set of Radio Buttons

Think about an old jukebox when you are thinking of radio buttons. Radio buttons are a Duration: 4:36

Create Styled Radio Groups

In this tutorial I’ll be showing you how to create styled radio groups using only HTML and CSS Duration: 8:57

Grouping radio buttons together with a containing element?

There doesn’t seem to be a way to do this. What I ended up doing in the end was generating a new GUID for each partial and appending it to the name attribute of the radio buttons in that partial.

I used the span attribute with an ID to group lists of radio buttons together.

How to get value of selected radio button using JavaScript?, To get the value of selected radio button, a user-defined function can be created that gets all the radio buttons with the name attribute

How can I create two groups of radio buttons in a HTML form and when change in A Group will change in B Group?

Just change the name attribute values on the radio buttons to group them and then just add an event listener to listen for changes.

var radioBtns = document.querySelectorAll("input[type=radio]");function radioChangeHndl(evt) < radioBtns.forEach(function(radioBtn) < radioBtn.checked = ''; if(radioBtn.value === this.value) < radioBtn.checked = 'true' >>.bind(this)) >radioBtns.forEach(function(radioBtn) < radioBtn.addEventListener('change', radioChangeHndl); >);

EDIT: Changed the HTML and JS. Know you just have to add the classes to the Radiobuttons. Tsted with Firefox, Chrome and IE 11. Maybe its not working because jquery is not loaded? If you Add jquery in the Javascript-Part, its working.

My solution is working in both ways. Click on form-a and form-b

HTML: I changed the button names for grouping. JQuery selector is the classname i added.

JS: I decided to use click event.

How to allow only one radio button to be checked?, @Clinteney without a name they’re not really part of the form and their value won’t be sent when submitting the form. The name is used by the browser to set «

How can i group radio buttons that are in different div tag [duplicate]

add an attribute name=»myRadio» for each radio.

radio inputs are grouped by the name attribute, which is required to maintain HTML validity. It also makes retrieving the selected value possible on the server side.

Put them in different form tag

 
 
Group 1
 Group 1 Option 1 Group 1 Option 2 Group 1 Option 3 
 
 
 
Group 2
 Group 2 Option 1 Group 2 Option 2 Group 2 Option 3 
 
 

HTML input type=»radio», The defines a radio button. Radio buttons are normally presented in radio groups (a collection of radio buttons describing a set of related

Источник

Radio Button In HTML: Complete Guide

In this article, you will learn everything about the HTML radio button. Its use, how to group it, how to style it using CSS, adding triggering events on it using JavaScript, etc.

You must have filled some online form before and would have interacted with options in a form where you have multiple choices to select but only one can be selected. Example gender selection , blood group selection , etc.

These are called radio buttons . Ideally, only one radio button can be selected for a single choice. For example, you can either select male , female , or transgender for gender selection.

HTML Radio Button

A radio button is an element of type=»radio» which is used to select only one choice among multiple choices.

It is generally used within a form but can be used alone.

To create a radio button give element a type of radio . Example

Here is an example of an HTML radio button:

HTML radio button example

You can check the above output by clicking on the button and you will observe that not only one choice but multiple choices can be selected above. Thinking why? 💭🤔

This is because none of the radio buttons are connected to each other with a common purpose. They are all independent and can be used for different purposes that are multiple of them are selected at a time.

To connect them together give them a common purpose by specifying name attribute.

HTML Radio Button Group

Practically radio buttons are used in group . So that when one button is selected then the other already get unselected if it was previously selected.

In a group of radio buttons, all the radio elements are connected. Only one button can be selected at a time.

Here is an example where radio buttons are not part of a group .

Radio buttons in the above example are not part of any group.

A radio group is defined by the name attribute. When 2 or more radio buttons are in a group they have the same name attribute.

When multiple radio buttons are given the same name then it becomes part of a group and when you select any radio button of that group it automatically deselects any other selected button in that group.

In the above example, all three radio buttons are part of a single group with name=»contact» which put them in a single group.

Radio Button Value

All radio buttons shown above have no value. This means if you select one then they don’t know for what value you want to select it.

Just an option written in front of it doesn’t mean it will take it as input.

To specify value for radio button give it a value attribute. Example

Now if you select any radio button then it will take the value of that radio button as input.

You have done a lot😊 let’s relax for a minute🍸🍹

What we have covered till now:

1. Radio button is created using element having type=»radio»
2. Radio button must have name attribute to be part of a group.
3. Radio button should have value attribute to specify value for that radio button.

Checked Radio Button

It is better to select the most probable radio button by default because if no option is selected while submitting the form then the radio group is not included in the submitted data at all.

You can do it by using the checked attribute.

checked attribute is a boolean attribute. It is either true or false .

Just using checked is same as checked=»true» .

Example: HTML radio button default selected

Radio Button Attributes

Here is a brief description of some frequently used attributes in radio buttons.

Attribute	description
type	It specifies input type, it must be added to create the type of button you want, i.e. radio
name	It creates a radio group, 1 or more than one radio buttons with the same name comes under same group
value	It delivers the selected button to the server if the radio button is checked
checked	It selects a radio button by default

Radio Button Label

Radio buttons has a very small clickable area, you have to pin-point the small box to click it. But you can increase the clickable area by using a label with a radio button.

Radio button label is created using element.

Radio button label must have a for attribute that targets the radio button.

And the radio button must have an id attribute that with the same value is used in for attribute.

Example: HTML radio button label

Now the clickable area of the radio button is increased. You can select any radio button either by clicking on the label or by clicking on the radio button.

Radio button onclick

You can trigger an event to know which radio button is checked. For this select all radio buttons and add an onclick event to all button.

When the button is checked the event will be triggered and you can alert a message with it.

// selecting radio button const buttons = document.querySelectorAll("input[type='radio']"); // adding event to all radio buttons buttons.forEach(button => < button.onclick = () => < if (button.checked) < alert(button.value + " selected as contact option!"); >> >)

Radio Button Style

Create your own custom radio button and style it using CSS since the browser’s radio button is styled by the browser itself.

Let the HTML code for the form with radio button be as follows:

Here is complete CSS code to create a custom styled radio button.

label < display: block; position: relative; padding-left: 50px; margin: 10px 0; cursor: pointer; font-size: 20px; >/* Hide the default radio button */ label input < position: absolute; opacity: 0; cursor: pointer; >/* Creating own radio button to style */ .custom-radio-button < position: absolute; top: 0; left: 0; height: 24px; width: 24px; background-color: #eee; border-radius: 50%; >/* hover effect on unchecked buttons */ label:hover input+.custom-radio-button < background: #fdd; >/* button checked */ label input:checked+.custom-radio-button < background-color: #bd1c10; >/* White dot on checked radio button (hidden) */ label .custom-radio-button::after < content: ""; display: none; position: absolute; width: 10px; height: 10px; border-radius: 50%; background: white; top: 50%; left: 50%; transform: translate(-50%, -50%); >/* Show the dot on checked button */ label input:checked+.custom-radio-button::after < display: block; >input[type="submit"]

Data Representation Of Radio Group

When a form is submitted with a radio button then the form’s data include an entry in the form name=value , here in the above case, one option could be contact=email .

If there is no value attribute in a radio button then data related to the radio button is not reported to the server.

Conclusion

You learned about radio buttons. Creating a group of radio buttons. Different types of attributes in it. Triggering an event when the button is checked and learned to style radio buttons.

You can also style the radio buttons using CSS.

Источник