Python raise all exceptions

# Exceptions

Errors detected during execution are called exceptions and are not unconditionally fatal. Most exceptions are not handled by programs; it is possible to write programs that handle selected exceptions. There are specific features in Python to deal with exceptions and exception logic. Furthermore, exceptions have a rich type hierarchy, all inheriting from the BaseException type.

# Do not catch everything!

While it’s often tempting to catch every Exception :

try: very_difficult_function() except Exception: # log / try to reconnect / exit gratiously finally: print "The END" # it runs no matter what execute. 

Or even everything (that includes BaseException and all its children including Exception ):

try: even_more_difficult_function() except: pass # do whatever needed 

In most cases it’s bad practice. It might catch more than intended, such as SystemExit , KeyboardInterrupt and MemoryError — each of which should generally be handled differently than usual system or logic errors. It also means there’s no clear understanding for what the internal code may do wrong and how to recover properly from that condition. If you’re catching every error, you wont know what error occurred or how to fix it.

This is more commonly referred to as ‘bug masking’ and should be avoided. Let your program crash instead of silently failing or even worse, failing at deeper level of execution. (Imagine it’s a transactional system)

Usually these constructs are used at the very outer level of the program, and will log the details of the error so that the bug can be fixed, or the error can be handled more specifically.

# Re-raising exceptions

Sometimes you want to catch an exception just to inspect it, e.g. for logging purposes. After the inspection, you want the exception to continue propagating as it did before.

In this case, simply use the raise statement with no parameters.

try: 5 / 0 except ZeroDivisionError: print("Got an error") raise 

Keep in mind, though, that someone further up in the caller stack can still catch the exception and handle it somehow. The done output could be a nuisance in this case because it will happen in any case (caught or not caught). So it might be a better idea to raise a different exception, containing your comment about the situation as well as the original exception:

try: 5 / 0 except ZeroDivisionError as e: raise ZeroDivisionError("Got an error", e) 

But this has the drawback of reducing the exception trace to exactly this raise while the raise without argument retains the original exception trace.

In Python 3 you can keep the original stack by using the raise — from syntax:

 raise ZeroDivisionError("Got an error") from e 

# Catching multiple exceptions

The first is by creating a tuple of the exception types you wish to catch and handle in the same manner. This example will cause the code to ignore KeyError and AttributeError exceptions.

try: d = > a = d[1] b = d.non_existing_field except (KeyError, AttributeError) as e: print("A KeyError or an AttributeError exception has been caught.") 

If you wish to handle different exceptions in different ways, you can provide a separate exception block for each type. In this example, we still catch the KeyError and AttributeError , but handle the exceptions in different manners.

try: d = > a = d[1] b = d.non_existing_field except KeyError as e: print("A KeyError has occurred. Exception message:", e) except AttributeError as e: print("An AttributeError has occurred. Exception message:", e) 

# Catching Exceptions

Use try. except: to catch exceptions. You should specify as precise an exception as you can:

try: x = 5 / 0 except ZeroDivisionError as e: # `e` is the exception object print("Got a divide by zero! The exception was:", e) # handle exceptional case x = 0 finally: print "The END" # it runs no matter what execute. 

The exception class that is specified — in this case, ZeroDivisionError — catches any exception that is of that class or of any subclass of that exception.

For example, ZeroDivisionError is a subclass of ArithmeticError :

>>> ZeroDivisionError.__bases__ (class 'ArithmeticError'>,) 

And so, the following will still catch the ZeroDivisionError :

try: 5 / 0 except ArithmeticError: print("Got arithmetic error") 

# Exception Hierarchy

Exception handling occurs based on an exception hierarchy, determined by the inheritance structure of the exception classes.

For example, IOError and OSError are both subclasses of EnvironmentError . Code that catches an IOError will not catch an OSError . However, code that catches an EnvironmentError will catch both IOError s and OSError s.

The hierarchy of built-in exceptions:

BaseException +-- SystemExit +-- KeyboardInterrupt +-- GeneratorExit +-- Exception +-- StopIteration +-- StandardError | +-- BufferError | +-- ArithmeticError | | +-- FloatingPointError | | +-- OverflowError | | +-- ZeroDivisionError | +-- AssertionError | +-- AttributeError | +-- EnvironmentError | | +-- IOError | | +-- OSError | | +-- WindowsError (Windows) | | +-- VMSError (VMS) | +-- EOFError | +-- ImportError | +-- LookupError | | +-- IndexError | | +-- KeyError | +-- MemoryError | +-- NameError | | +-- UnboundLocalError | +-- ReferenceError | +-- RuntimeError | | +-- NotImplementedError | +-- SyntaxError | | +-- IndentationError | | +-- TabError | +-- SystemError | +-- TypeError | +-- ValueError | +-- UnicodeError | +-- UnicodeDecodeError | +-- UnicodeEncodeError | +-- UnicodeTranslateError +-- Warning +-- DeprecationWarning +-- PendingDeprecationWarning +-- RuntimeWarning +-- SyntaxWarning +-- UserWarning +-- FutureWarning +-- ImportWarning +-- UnicodeWarning +-- BytesWarning 

BaseException +-- SystemExit +-- KeyboardInterrupt +-- GeneratorExit +-- Exception +-- StopIteration +-- StopAsyncIteration +-- ArithmeticError | +-- FloatingPointError | +-- OverflowError | +-- ZeroDivisionError +-- AssertionError +-- AttributeError +-- BufferError +-- EOFError +-- ImportError +-- LookupError | +-- IndexError | +-- KeyError +-- MemoryError +-- NameError | +-- UnboundLocalError +-- OSError | +-- BlockingIOError | +-- ChildProcessError | +-- ConnectionError | | +-- BrokenPipeError | | +-- ConnectionAbortedError | | +-- ConnectionRefusedError | | +-- ConnectionResetError | +-- FileExistsError | +-- FileNotFoundError | +-- InterruptedError | +-- IsADirectoryError | +-- NotADirectoryError | +-- PermissionError | +-- ProcessLookupError | +-- TimeoutError +-- ReferenceError +-- RuntimeError | +-- NotImplementedError | +-- RecursionError +-- SyntaxError | +-- IndentationError | +-- TabError +-- SystemError +-- TypeError +-- ValueError | +-- UnicodeError | +-- UnicodeDecodeError | +-- UnicodeEncodeError | +-- UnicodeTranslateError +-- Warning +-- DeprecationWarning +-- PendingDeprecationWarning +-- RuntimeWarning +-- SyntaxWarning +-- UserWarning +-- FutureWarning +-- ImportWarning +-- UnicodeWarning +-- BytesWarning +-- ResourceWarning 

# Else

Code in an else block will only be run if no exceptions were raised by the code in the try block. This is useful if you have some code you don’t want to run if an exception is thrown, but you don’t want exceptions thrown by that code to be caught.

try: data = 1: 'one', 2: 'two'> print(data[1]) except KeyError as e: print('key not found') else: raise ValueError() # Output: one # Output: ValueError 

Note that this kind of else: cannot be combined with an if starting the else-clause to an elif . If you have a following if it needs to stay indented below that else: :

try: ... except ...: ... else: if ...: ... elif ...: ... else: ... 

# Raising Exceptions

If your code encounters a condition it doesn’t know how to handle, such as an incorrect parameter, it should raise the appropriate exception.

def even_the_odds(odds): if odds % 2 != 1: raise ValueError("Did not get an odd number") return odds + 1 

# Creating custom exception types

Create a class inheriting from Exception :

class FooException(Exception): pass try: raise FooException("insert description here") except FooException: print("A FooException was raised.") 

or another exception type:

class NegativeError(ValueError): pass def foo(x): # function that only accepts positive values of x if x  0: raise NegativeError("Cannot process negative numbers") ... # rest of function body try: result = foo(int(input("Enter a positive integer: "))) # raw_input in Python 2.x except NegativeError: print("You entered a negative number!") else: print("The result was " + str(result)) 

# Exceptions are Objects too

Exceptions are just regular Python objects that inherit from the built-in BaseException . A Python script can use the raise statement to interrupt execution, causing Python to print a stack trace of the call stack at that point and a representation of the exception instance. For example:

>>> def failing_function(): ... raise ValueError('Example error!') >>> failing_function() Traceback (most recent call last): File "", line 1, in module> File "", line 2, in failing_function ValueError: Example error! 

which says that a ValueError with the message ‘Example error!’ was raised by our failing_function() , which was executed in the interpreter.

Calling code can choose to handle any and all types of exception that a call can raise:

>>> try: ... failing_function() ... except ValueError: ... print('Handled the error') Handled the error 

You can get hold of the exception objects by assigning them in the except. part of the exception handling code:

>>> try: ... failing_function() ... except ValueError as e: ... print('Caught exception', repr(e)) Caught exception ValueError('Example error!',) 

A complete list of built-in Python exceptions along with their descriptions can be found in the Python Documentation: https://docs.python.org/3.5/library/exceptions.html

(opens new window) . And here is the full list arranged hierarchically: Exception Hierarchy

# Practical examples of exception handling

# User input

Imagine you want a user to enter a number via input . You want to ensure that the input is a number. You can use try / except for this:

while True: try: nb = int(input('Enter a number: ')) break except ValueError: print('This is not a number, try again.') 

Note: Python 2.x would use raw_input instead; the function input exists in Python 2.x but has different semantics. In the above example, input would also accept expressions such as 2 + 2 which evaluate to a number.

If the input could not be converted to an integer, a ValueError is raised. You can catch it with except . If no exception is raised, break jumps out of the loop. After the loop, nb contains an integer.

# Dictionaries

Imagine you are iterating over a list of consecutive integers, like range(n) , and you have a list of dictionaries d that contains information about things to do when you encounter some particular integers, say skip the d[i] next ones.

d = [7: 3>, 25: 9>, 38: 5>] for i in range(len(d)): do_stuff(i) try: dic = d[i] i += dic[i] except KeyError: i += 1 

A KeyError will be raised when you try to get a value from a dictionary for a key that doesn’t exist.

# Running clean-up code with finally

Sometimes, you may want something to occur regardless of whatever exception happened, for example, if you have to clean up some resources.

The finally block of a try clause will happen regardless of whether any exceptions were raised.

resource = allocate_some_expensive_resource() try: do_stuff(resource) except SomeException as e: log_error(e) raise # re-raise the error finally: free_expensive_resource(resource) 

This pattern is often better handled with context managers (using the with statement

# Chain exceptions with raise from

In the process of handling an exception, you may want to raise another exception. For example, if you get an IOError while reading from a file, you may want to raise an application-specific error to present to the users of your library, instead.

You can chain exceptions to show how the handling of exceptions proceeded:

>>> try: 5 / 0 except ZeroDivisionError as e: raise ValueError("Division failed") from e Traceback (most recent call last): File "", line 2, in module> ZeroDivisionError: division by zero The above exception was the direct cause of the following exception: Traceback (most recent call last): File "", line 4, in module> ValueError: Division failed 

# Syntax

• raise exception
• raise # re-raise an exception that’s already been raised
• raise exception from cause # Python 3 — set exception cause
• raise exception from None # Python 3 — suppress all exception context
• try:
• except [exception types][ as identifier]:
• else:
• finally:

Источник