Apache пишет нет php

Страница Apache не видит PHP — почему это происходит?

Когда я захожу на эту страницу по http://http://192.168.56.101/~username/
HTML text — видно без проблем, РНР text — не видно!

Я так понимаю что в данном случае апач не может прочесть РНР — код.

PHP установлен!

Простой 3 комментария

Да, кажется рнр ставил отдельно (но я только дней 5 изучаю линукс — так что не судите строго пожалуйста). Кажется сначала апач а потом рнр. Я по виндоуз-наивности не знал что это важно — так что не помню что первым а что — вторым..

А что такое хэндлер — я пока еще не знаю.

wolverine777, хендлер — обработчик.
1. отдельностоящий php это не тоже самое, что php-библиотека для apache
2. В настройках apache нужно прописать, что php файлы нужно обрабатывать через php а не просто выводить. В любом инструкции по настройке php для apache это описано.

Проще нагуглить полную инструкцию по установке php для apache ваших версий — в зависимости от версий могут быть отличия.

Спасибо вот

апач перезагрузил но все равно не вижу.

RemoveHandler .html .htm AddType application/x-httpd-php .php .htm .html

За что именно руки-то ломать?

За неумение прочитать вопрос перед ответом, разве что.

ТыжСисАдмин, в тестовом файле из пяти строк, которым проверяется принципиальная работоспособность? 🙂

Ну привет еще раз всем. Вот и решение проблемы (от друга из Яндекса ))))) )

Вот тут вот: cat /etc/apache2/mods-enabled/php7.0.conf

надо было просто закомментить последний параграф (как там написано, comment the following lines # (from to .))

# Running PHP scripts in user directories is disabled by default # # To re-enable PHP in user directories comment the following lines # (from to .) Do NOT set it to On as it # prevents .htaccess files from disabling it. # # # php_admin_flag engine Off # #

Источник

Как включить php в apache?

Установил apache, php-fpm, libapache2-mod-php. Хотел включить через a2enmod php, но при старте получаю ошибку. Удалил Апач, установил, но php mod пропал из спика установленных. Что делать?

Оценить 9 комментариев

slo_nik: ошибок нет. Ставил php-fpm либу для апча, и сам Апач. Включил php Апач перестал запускаться. Лог ошибок пустой. Удалил Апач поставил Апач. Теперь не могу включить php

slo_nik: apt-get install php-fpm apache2 libapache2-mod-php
a2enmod php # модуля нет
В a2enmod даже намеков нету на php

Кирилл Жиляев: Удалите пакеты, потом ставите tasksel
sudo apt-get install tasksel
Затем
sudo tasksel
Клавишами курсора выбираете LAMP Serve, подтверждаете выбор пробелом, затем TAB и ENTER. Установится полностью apache + php + mysql

slo_nik что делать?
Reading package lists. Done
Building dependency tree
Reading state information. Done
libapache2-mod-php7.0 is already the newest version (7.0.15-0ubuntu0.16.04.4).
0 upgraded, 0 newly installed, 0 to remove and 67 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] Y
Setting up libapache2-mod-php7.0 (7.0.15-0ubuntu0.16.04.4) .
dpkg: error processing package libapache2-mod-php7.0 (—configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
libapache2-mod-php7.0
E: Sub-process /usr/bin/dpkg returned an error code (1)
ladybug@72261:~$

Источник

How to fix Apache 2 not executing PHP files

If your Apache 2 web server is failing to execute PHP files, learn how to quickly remedy this issue.

We may be compensated by vendors who appear on this page through methods such as affiliate links or sponsored partnerships. This may influence how and where their products appear on our site, but vendors cannot pay to influence the content of our reviews. For more info, visit our Terms of Use page.

How many times have you set up a web server with Apache 2 only to find out that when you attempt to view a page with a .php extension, the page either attempts to save onto the local drive or it displays the PHP code in the browser? This is bad on multiple levels. First off, your website isn’t functioning properly; even worse is the idea that someone could get a first-hand glimpse of your code, which is not only a frustration, but a possible security issue.

Networking: Must-read coverage

• Gartner releases 4 trends that will impact cloud, data centers and infrastructure in 2023
• Support for these Microsoft enterprise products ends in 2023
• Dell Technologies World 2023: Q&A on how Dell sees security at the edge
• Best VPNs for small business in 2023

Considering this is an easy fix, there’s no reason to avoid working with PHP and Apache 2. But how do you fix it? Let me show you. Note: I demonstrate this process on Ubuntu Server 16.04, running the latest releases of Apache 2 and PHP.

Modify the .conf file

The first thing we must do is modify the main Apache 2 configuration file. To do this, open a terminal window and issue the command:

sudo nano /etc/apache2/apache2.conf

With apache2.conf open, all you have to do is add the following to the bottom of the file:

SetHandler application/x-httpd-php
​

Save and close apache2.conf.

Enable/disable modules

In order to get PHP to function properly, you have to disable the mpm_event module and enable the mpm_prefork and php7 modules. To do this, go back to your terminal window and issue the command:

sudo a2dismod mpm_event && sudo a2enmod mpm_prefork && sudo a2enmod php7.0

Restart Apache 2

You’re ready to restart Apache 2. Because we’ve disabled/enabled modules, we have to do a full restart of Apache 2 (instead of a reloading of the configuration files). To restart Apache, go back to the terminal window and issue the command:

sudo service apache2 restart

You should now be able to point a browser to a PHP file and watch it execute properly, as opposed to saving to your local drive or displaying code in your browser.

That’s it–Apache 2 should be functioning exactly as you need.

A simple fix

I warned you this would be a simple fix. Apache 2 is a very admin-friendly web server to configure and manage. Although one would think executing PHP would be an out-of-the box feature, it’s a very easy issue to resolve.

Subscribe to the TechRepublic Premium Exclusives Newsletter

Save time with the latest TechRepublic Premium downloads, including original research, customizable IT policy templates, ready-made lunch-and-learn presentations, IT hiring tools, ROI calculators, and more. Exclusively for you!

Delivered Tuesdays and Thursdays

Also See

• How to secure your Apache 2 server in four steps (TechRepublic)
• How to tune Apache in seconds with apache2buddy.pl (TechRepublic)
• How to enable server-side encryption in Nextcloud (TechRepublic)
• How to enable two-factor authentication on Nextcloud 10 (TechRepublic)
• How to install a LAMP server on openSUSE (TechRepublic)
• How to add virtual hosts to NGINX (TechRepublic)
• How to install a LAMP stack on CentOS (TechRepublic)
• When to use NGINX instead of Apache (ZDNet)

Источник

How to Fix Apache Not Executing PHP Files

Sometimes Apache web server displays PHP files without actually executing the code in them. In this case, users don’t see the result of executed PHP but the underlying code. It can pose security risks to expose your website’s code to visitors. This is a common problem especially if you are using Apache/PHP for the first time. In this article, we will look at how to fix Apache not executing PHP files.

How to Fix Apache Not Executing PHP Files

Here are the steps to get Apache to execute PHP files.

1. Update Apache configuration file

Open terminal and open Apache configuration file.

$ sudo vi /etc/apache2/apache2.conf

Add the following lines to the bottom of your file.

 SetHandler application/x-httpd-php ​

2. Disable & Enable modules

To get PHP execution working properly, you need to disable and then enable mpm_event_module, and enable mpm_prefork and php7 modules.

$ sudo a2dismod mpm_event && sudo a2enmod mpm_prefork && sudo a2enmod php7.0

3. Restart Apache Server

Restart Apache Server to apply changes.

$ sudo service apache2 restart

That’s it. Now open your browser and go to your website. You should see PHP code being executed properly. Apache is a powerful web server that offers plenty of useful features. Of course, there can be many other reasons for PHP not being executed on your server. We have listed the most common solutions to this problem. If they don’t work for you, then you need to go through your Apache configuration file for errors.

Источник

How to Fix Apache Not Executing PHP Files

Sometimes Apache web server displays PHP files without actually executing the code in them. In this case, users don’t see the result of executed PHP but the underlying code. It can pose security risks to expose your website’s code to visitors. This is a common problem especially if you are using Apache/PHP for the first time. In this article, we will look at how to fix Apache not executing PHP files.

How to Fix Apache Not Executing PHP Files

Here are the steps to get Apache to execute PHP files.

1. Update Apache configuration file

Open terminal and open Apache configuration file.

$ sudo vi /etc/apache2/apache2.conf

Add the following lines to the bottom of your file.

 SetHandler application/x-httpd-php ​

2. Disable & Enable modules

To get PHP execution working properly, you need to disable and then enable mpm_event_module, and enable mpm_prefork and php7 modules.

$ sudo a2dismod mpm_event && sudo a2enmod mpm_prefork && sudo a2enmod php7.0

3. Restart Apache Server

Restart Apache Server to apply changes.

$ sudo service apache2 restart

That’s it. Now open your browser and go to your website. You should see PHP code being executed properly. Apache is a powerful web server that offers plenty of useful features. Of course, there can be many other reasons for PHP not being executed on your server. We have listed the most common solutions to this problem. If they don’t work for you, then you need to go through your Apache configuration file for errors.

Источник